FRUND
Software for simulation the multibody dynamics of the rigid and flexible bodies

7.jpg (11739 bytes)
[ < back ]

The flexible of the frame construction is important factor of vehicle vibration. Software FRUND introduce flexible bodies by restrict set of eigenfrequencies and eigenvectors. One set is provide from the finite elements method (FEM) software. FRUND contain the open interface to input one sets from FEM programs. For case of stochastic excitation postprocessor provide algorithms statistical analysis of the results modeling.


p2_1.gif (25563 bytes)

Scheme of the autobus ZIL 32501 with flexible frame and cab.

p2_2.gif (14637 bytes)

The animation of the flexible displacement of frame and cab from movement over single obstacle, scaled-up 16.

p2_3.gif (8710 bytes)

Comparison calculated and experimental power spectral density.

p2_4.gif (17752 bytes)

Scheme of the car VAZ 2123 with flexible cab and tailpipe.

p2_4a.gif (74135 bytes)

FEM cab model, MSC NASTRAN .

p2_5.gif (7671 bytes)

Comparison calculated and experimental power spectral density, VAZ 2123.

p2_6.gif (8068 bytes)

Flexible displacement tailpipe at “good” cobbly,V=60 km/h, scaled-up 256.

p2_7.gif (18561 bytes)

Flexible displacement cab at “good” cobbly,V=60 km/h, scaled-up 512.

example1 (~1187 Kb)
example2 (~387 Kb)
example3 (~547 Kb)
example4 (~459 Kb)
example5 (~453 Kb)
example6 (~565 Kb)
example7 (~1165 Kb)
[ < back ]
Volgograd State Technical University © 2005, frund.vstu@gmail.com